FA 014-1600 - Oil Service Unit
With the FA 014 hydraulic and lubricating systems can be filled or cleaned
FA 014 comes ready to connect, with hose packages
No tools are needed to open the housing and the filter element can be pulled out through the hang-in technique in the cover
On the bottom of the from inside to outside flown through filter elements there is a dirt retention valve. If the filter element is pulled out of the housing, the dirt retention valve will close. Sedimented dirt is removed from the housing with the filter element.
Longer service intervals and higher machine availability
Image 1

FA 014-1600

Image 2
Nominal flow rate
16 l/min
Hydraulic fluids Mineral oil and biodegradable fluids (other fluids on request)
Temperature range of fluids
0°C - +60°C
Viscosity range Continuous operation minimal 15 mm²/s, Continuous operation maximal 250 mm²/s, Short-term operation maximal 400 mm²/s
Filter fineness
10EX2 ß10(C)=200
Dirt-holding capacity
Operating pressure
Maximal 4 bar
Lenght of hoses Suction hose DN20 x 1.8 m long (PVC-spiral coiled hose) with suction strainer 250 µm, pressure hose DN20 x 2.0 m long (PVC-spiral coiled hose) – lance DN20 0.25 m long
Ambient temperature range
0°C - +50°C
Operating voltage/ -frequency
1 ~ 230V / 50Hz
Power / protection type
0,45 kW / IP 55
Suction height
1,5 m maximal
Clogging indicator
Replacement element
V 7.1210-06
ca. 16 kg
*according to ISO 16889
Please select your FA014-1600 oil service unit and spare parts by clicking in the first blue frame. Information about availability and price will be provided for you when you are logged on. Or send us an enquiry.
site by visiosoft GmbH